Honda EM6000GN Manual page 51

HONDA
EP5000-EPS500S
• CONNECTING ROD BIG END 1.0.
Standard Service limit
36.025 mm 36.07 mm
(1.4183 in) (1.420 in)
• CRANK PIN
0.0.
Standard Service limit
35.985 mm 35.93 mm
(1.4167 in)
(1.415 in)
• CONNECTING ROD BIG END SIDE CLEARANCE
Standard Service limit
0.1-0.7 mm 1.0 mm
(0.004 - 0.028 in) (0.04 in)
• CONNECTING ROD BIG END OIL CLEARANCE
1) Clean all from the crankpin and connecting rod big end
surfaces.
2) Place a piece of plastigauge on the crankpin, install the
connecting rod and cap, and tighten the bolts to the
specified torque.
TORQUE: 14 N'm (1.4 kg-m, 10 ft-Ib)
NOTE
• Do not rotate the crankshaft while the plastigauge is in
place.
12-7