The Battery; Insert The Battery; Attach The Battery Cover - Philips AZ@LIS Manual

The battery

Your phone is powered by a rechargeable battery.
• To optimize the battery capacity, please allow the battery to fully discharge
the 3 first times before recharging.
• To maintain optimal battery capacity, do not wait until the battery indicator
reaches low. This level is reached when only one bar is displayed in the
battery indicator, see page 9.
• If you do not use the phone for several days, you should disconnect the
battery.
• For a full recharging please allow the charger to be connected for 1h40.

Insert the battery

1
Plug the connector into the socket. If you
cannot plug the connector, try again
reversing the plug.
2
Slide the battery in its housing.

Attach the battery cover

1
Hook the battery cover onto the
hinges on the bottom of the phone.
2
Press the top down until latch
catches.
6