Bambu Lab Kit-002 Assembly Manual page 10

Note1:Push in the area of the battery cover depicted above to open it.
Note 2: If the mouse disconnects during initial startup, you can perform a pairing operation as described below:
1. Keep the mouse powered off.
2. Insert the receiver into the computer.
3. Place the mouse as close as possible to the receiver.
4. While holding down the left button, right button, and scroll wheel button, power on the mouse.
5. Continue to hold down the 3 buttons for 4-5 seconds.
6. When the arrow on screen changes, power off the mouse.
7. Power the mouse on again to resume normal use.