Care And Cleaning - GE GTW585 Owner's Manual & Installation Instructions

Care and Cleaning

WARNING
- Electrical Shock Hazard
Certain internal parts are intentionally not grounded and may present a risk of electric shock only during servicing.
Service personnel – DO NOT contact the following parts while the appliance is energized: Drive Motor, Lid Lock,
Water Valves, Drain Pump and Recirculation Pump.
Exterior of the Washer
Immediately wipe off any spills with a damp cloth.
Interior of the Washer
To clean the interior of the washer, select the Bulky cycle on
the control panel. This Bulky cycle should be performed, at
a minimum, once per month. This cycle will use more water,
in addition to bleach, to control the rate at which soils and
detergents may accumulate in your washer.
NOTE: Read the instructions below completely before starting
the Bulky cycle.
1. Remove any garments or objects from the washer and
ensure the washer basket is empty.
2. Open the washer lid and pour one cup or 250 ml
of liquid bleach or other washing machine
cleaner into the basket.
49-3000384 Rev 0
3. Close the lid and select the Bulky cycle. Push the Start
button.
4. When the Bulky cycle is working, the display will show the
estimated cycle time remaining. Do not interrupt the cycle.
IMPORTANT:
Run Bulky with 1 Cup (250 ml) of bleach once a month.
After the completion of a Bulky cycle, the interior of your
washer may have a bleach smell.
For basket cleaning option, download and refer to the SmartHQ
App.
17