Table of Contents
Advertisement
network connection and setup & webviewer
CONNECTING TO THE CAMERA FROM A SHARED LOCAL PC
1. Run device manager.
It will scan for connected cameras and display them as a list.
2. Double-click a camera to access.
The Internet browser starts and connects to the camera.
`
M
Access to the camera can also be gained by typing the camera's IP address in the address bar of the
Internet browser.
CONNECTING TO THE CAMERA FROM A REMOTE PC VIA THE INTERNET
On a remote computer that is not in the Broadband Router's network cluster is not allowed, users can access
cameras within a Broadband Router's network by using the camera's DDNS URL.
1. Before you can access a camera in the Broadband Router network, you should have set the port
range forward for the Broadband Router.
2. From the remote PC, launch the Internet browser and type the DDNS URL address of the camera, or
the IP address of the Broadband Router in the address bar.
ex) http://ddns.hanwha-security.com/ID
`
M
To use DDNS, sign up at the DDNS homepage (http://ddns.hanwha-security.com) and register the product
at [My DDNS]>[Register Product].
CONNECTING TO THE CAMERA
Normally, you would
1. Launch the Internet browser.
2. Type the IP address of the camera in the address bar.
ex) • IP address (IPv4) : 192.168.1.100 ; http://192.168.1.100
- the Login dialog should appear.
• IP address (IPv6) : 2001:230:abcd: ffff:0000:0000:ffff:1111
; http://[2001:230:abcd:ffff:0000:0000:ffff:1111] - the Login
dialog should appear.
30_ network connection and setup & webviewer
Advertisement
Table of Contents
