Network Connection And Setup - Hanwha Vision SMT-1031PV Manual

network connection and setup & webviewer
You can set up the network settings according to your network configurations.
CONNECTING THE PVM DIRECTLY TO LOCAL AREA NETWORKING
Connecting to the PVM from a local PC in the LAN
1. Launch an Internet browser on the local PC.
2. Enter the IP address of the PVM in the address bar of the browser.
`
M
A remote PC in an external Internet out of the LAN network may not be able to connect to the PVM installed
in the intranet if the port-forwarding is not properly set or a firewall is set.
In this case, to resolve the problem, contact your network administrator.
`
By factory default, the IP address will be assigned from the DHCP server automatically.
If there is no DHCP server available, the IP address will be set to 192.168.1.100.
To change the IP address, use the Device Manager.
For further details on Device Manager use, refer to "Using Device Manager". (Page 25)
Local PC
<Local Network>
INTERNET
External Remote PC
DDNS Server
(Data Center, KOREA)
English _23