Mounting Extra Foot - ETNA KVV228 Series Instructions For Use Manual

INSTALLATION AND CONNECTION

Mounting extra foot

The extra foot prevents the appliance from tipping forward when:
• the refrigerator is empty, and
• the door is loaded to its maximum (15 kg), and
• the door is opened about 90 degrees.
Install the extra foot as follows:
1
2 3
1. Tip the appliance and locate the screw
hole at the left side of the bottom.
2. Place the screw in the screw hole of the
extra foot.
3. Attach the extra foot using a Phillips-head
screwdriver (not included).
EN 15