Table of Contents
Advertisement
2-3-2 DF Common Options
Parameter
DF Common Options
Memory Addressing
ACPI
Link
SDCI
Probe Filter
DF Watchdog Timer Interval
Disable DF to external IP
sync flood propagation
Sync flood propagation to DF
Components
Freeze DF module queues on
error
CC6 memory region encryption
CCD B/W Balance Throttle
Level
Description
Press [Enter] for configuration of advanced items.
Press [Enter] for configuration of advanced items.
Press [Enter] for configuration of advanced items.
Press [Enter] for configuration of advanced items.
Press [Enter] for configuration of advanced items.
Configures the Data Fabric watchdog timer interval.
Options available: Auto, 41ms, 166ms, 334ms, 669ms, 1.34 seconds, 2.68
seconds, 5.36 seconds. Default setting is Auto.
Enable/Disable SyncFlood to UMC & downstream slaves.
Options available: Sync flood disabled, Sync flood enabled, Auto.
Default setting is Auto.
Enable/Disable DF Sync Flood propagation.
Options available: Sync flood disabled, Sync flood enabled, Auto.
Default setting is Auto.
Options available: Disabled, Enabled, Auto. Default setting is Auto.
Controls whether or not the CC6 save/restor memory is encrypted.
Options available: Disabled, Enabled, Auto. Default setting is Auto.
Options available: Auto, Level 0, Level 1, Level 2, Level 3, Level 4. Default
setting is Auto.
BIOS Setup
- 86 -
Advertisement
Table of Contents
