TH-42LF20W / TH-47LF20W
8.15. Replacement method for
RC+LED board
1. Slide the 2 fittings on the inside of the cabinet front toward
the outside and remove.
2. Remove the FFC cable from the RC+LED board's coupler
(K19I), and replace the board with the replacement
board.
3. When replacing the cabinet front, remove the shield RC
and the DEC LED (clear plate) on the inside.
The gasket is affixed to the shield RC. When replacing,
also replace the gasket.
4. The spacer sheet and the gasket are affixed to the fittings
that hold down the RC+LED board.
When replacing the fittings, also replace the spacer sheet
and the gasket.
8.16. Cabinet front replacement
Precautions when replacing
• The parts that are necessary for replacement (spacer sheet,
Panasonic badge, etc.) are not included. They are supplied
as replacement parts. Replace them at the same time as the
cabinet front.
1. Remove the spacer sheet that is affixed to the inside of
the cabinet front.
2. Slide off the mounting and remove it from the cabinet
front.
3. Affix the Panasonic badge to the replacement cabinet
front beforehand.
22