Table of Contents
Advertisement
devices in order to establish a connection.
KEY1 ~ KEY 4：You can specify up to 4 different
keys, but only one can be used at a time.
Encryption：Enter the key value in this field.
A key of 10 hexadecimal characters (0-9, A-F) is
required if a 40-bit (a.k.a. 64-bit) Key Size is
selected.
A key of 26 hexadecimal characters (0-9, A-F) is
required if a 128-bit Key Size is selected.
A key of 58 hexadecimal characters (0-9, A-F) is
required if a 256-bit Key Size is selected.
Key size
Select from 40-bit (a.k.a. 64-bit), 128-bit or
256-bit.
802.1x Configuration
The 802.1x Configuration window is used to configure WEP, CCX and
WPA security with 802.1x authentication.
This panel enables you to select an authentication
Protocol
protocol.
Password
This panel is available when EAP-TLS is not selected
(either MSCHAP V2 over PEAP is selected with WEP
or LEAP is selected for CCX). This panel enables you
to enter a login name and password or request that the
driver prompt for them when you connect to a
-
21 -
Advertisement
Table of Contents
