Table of Contents
Advertisement
Preferred SSID
Type in the SSID name of the device you want to
connect to.
BSS Type
You can select the connection type: Peer-to-Peer,
Access Point or Auto Mode.
Tx Rate
You can select the data rate or set to auto mode from the
pull-down menu.
Channel
Select the channel you want to use.
Power Mode
No Power Save：the adapter will be in full active mode.
Max Power Save ： the power save mode will be enabled.
Select to disable or enable the TI-Based 4x function.
4x Config
Packet Burst Enable
Enable this function（if the device you connect
supports Packet Bursting Mode） to increase the
efficiency of your network.
Mode
Select
+(B-Plus) , 802.11g (G-Only) or B&G Mode (If you
choose this option the device will automatically convert
the suitable standard ).
Profile
Enter the profile name and click the Save button to
save your configuration, To open the profiles you
from
IEEE
802.11b(B-Only),
-
14 -
802.11b
Advertisement
Table of Contents
