Rear Panel Metal Bot L/R Replacement; Metal Bracket Bottom Replacement - Panasonic TH-42LFE6W Service Manual

Caution when attaching the Rear Panel Top/L/R Assy
• As shown in the following figure, please insert the part of
A correctly.
Please tighten a screw, pressing down Rear Panel L/R
Assy and Rear Panel Top Assy by hand and fixing.
7.12. Rear Panel Metal Bot L/R
replacement
1. Remove the Speaker Unit L/R.
(Refer to "7.8. Speaker Unit L/R replacement")
2. Remove the LED Panel Case.
(Refer to "7.9. K-Board, LED Panel and LED Panel Case
replacement")
3. Remove the Rear Panel BTM Assy.
(Refer to "7.10. Rear Panel BTM Assy replacement")
4. Remove the Rear Panel L/R Assy.
(Refer to "7.11. Rear Panel Top/L/R Assy replacement")
• When removing the Rear Panel Metal Bot L, remove
the Rear Panel L Assy.
• When removing the Rear Panel Metal Bot R, remove
the Rear Panel R Assy.
5. Remove the screws, and then remove the Rear Panel
Metal Bot L/R.
Caution when attaching the Rear Panel Metal Bot L/R
• Please check that the hooks (positioning) of metals are
inserted firmly when assembling.
7.13. Metal Bracket Bottom replace-
ment
1. Remove the Speaker Unit L/R.
(Refer to "7.8. Speaker Unit L/R replacement")
2. Remove the LED Panel Case.
(Refer to "7.9. K-Board, LED Panel and LED Panel Case
replacement")
3. Remove the Rear Panel BTM Assy.
(Refer to "7.10. Rear Panel BTM Assy replacement")
4. Remove the Rear Panel L/R Assy.
(Refer to "7.11. Rear Panel Top/L/R Assy replacement")
5. Remove the Rear Panel Metal Bot L/R.
(Refer to "7.12. Rear Panel Metal L/R replacement")
6. Remove the screws, and then remove the Metal Bracket
Bottom.
23
TH-42LFE6W