Table of Contents
Advertisement
1.4 Safe installation
WARNING ‒ Risk of electric shock!
Incorrect installation is dangerous.
Connect and operate the appliance only in accordance with the
▶
specifications on the rating plate.
Connect the appliance to a power supply with alternating cur-
▶
rent only via a properly installed socket with earthing.
The protective conductor system of the domestic electrical in-
▶
stallation must be properly installed. The installation must have
a sufficiently large cross section.
When using a residual current circuit breaker, only use a type
▶
with the
Never equip the appliance with an external switching device,
▶
e.g. a timer or remote control.
Never connect the appliance to a circuit that is regularly
▶
switched on and off by the energy supplier.
When the appliance is installed, the mains plug of the power
▶
cord must be freely accessible. If free access is not possible, an
all-pole isolating switch must be installed in the permanent elec-
trical installation according to the installation regulations.
When installing the appliance, check that the power cable is not
▶
trapped or damaged.
If the insulation of the power cord is damaged, this is dangerous.
Never let the power cord come into contact with hot appliance
▶
parts or heat sources.
Never let the power cord come into contact with sharp points or
▶
edges.
Never kink, crush or modify the power cord.
▶
WARNING ‒ Risk of fire!
It is dangerous to use an extended power cord and non-approved
adapters.
Do not use extension cables or multiple socket strips.
▶
Only use adapters and power cords approved by the manufac-
▶
turer.
mark.
Safety en
5
Advertisement
Table of Contents
