Honda ODYSSEY 2019 Owner's Manual page 206

uuOperating the Switches Around the Steering WheeluDriving Position Memory System
■
Storing a Position in Memory
Memory
Button 1
Memory
Button 2
SET Button
■
Recalling the Stored Position
Memory
Button 1
Memory
Button 2
SET Button
204
1. Set the power mode to ON. Adjust the
driver's seat and the door mirrors to the
desired position.
2. Press the SET button.
u You will hear the beeper, and the
memory button indicator light will blink.
3. Press and hold memory button
within five seconds of pressing the SET
button.
u Once the seat and the outside mirrors
position has been memorized, the
indicator light on the button you pressed
stays on.
1. Change to P .
(
2. Apply the parking brake.
3. Press a memory button ( 1 or (
u You will hear the beeper, and the
indicator light will blink.
The seat and the door mirrors will
automatically move to the memorized
position. When it has finished moving, you
will hear the beeper, and the indicator light
stays on.
*
1Storing a Position in Memory
After you press the SET button, the storing operation
will be canceled when:
•
You do not press the memory button within five
seconds.
•
You readjust the seat and door mirrors position
before the double-beep.
•
You set the power mode to any position except
ON.
( 1 or ( 2
1Recalling the Stored Position
The seat and the door mirrors will stop moving if you:
•
Press the SET button or memory button
•
Adjust the seat position or door mirrors.
( 2 ).
•
Put the transmission into a position other than
or .
( 1 ( 2
( P .