Honda ODYSSEY 2019 Owner's Manual page 198

uuOperating the Switches Around the Steering WheeluAuto High-Beam
■
Disabling or Re-enabling the System
196
Disable or re-enable the system when the
vehicle is parked and the power mode is in ON
and the light switch is in the AUTO position.
Disabling the system: Pull the light switch
lever toward you and hold it for at least 40
seconds. The auto high-beam indicator in the
meter will blink twice.
Re-enabling the system: Pull the light
switch lever toward you and hold it for at least
30 seconds. The auto high-beam indicator in
the meter will blink once.
*
1Disabling or Re-enabling the System
The auto high-beam is in the previously selected
disabled or re-enabled setting each time you start the
engine.