Selecting A Sound Mode - Denon DHT-S218 Owner's Manual

Contents Connections
Settings
Perform the below operations and settings as needed.
Sound mode
buttons
Playback

Selecting a sound mode

1
VOL +, –
BASS +, –
NOTE
0 In pure mode, Dolby Atmos playback is not supported. If a Dolby Atmos signal is
input when in pure mode, the status LED displays the signal input as Dolby (other
than Atmos). (v p. 9)
28
Settings Tips
Press the sound mode button to select a sound mode.
When the button is pressed, the rightmost status LED blinks and the
sound mode changes. (v p. 9)
Enjoy movie theater-like surround
MOVIE:
sound.
Compresses the dynamic range
(difference between loud and soft
NIGHT:
sounds) to make audio easier to hear at
low volumes.
Enjoy the full presence of a wide,
MUSIC:
encompassing acoustic field.
Adjust the volume of dialog in movies,
DIALOG ENHANCER vocals in music, etc. so these can be
LOW / MED / HIGH: heard more easily. Can be set to 3
levels. Set this to the desired value.
Enjoy sound that is faithful to the
PURE:
original source.
Appendix