Related Manuals for Milwaukee M18 FUEL ONE-KEY FSAGES125
Summary of Contents for Milwaukee M18 FUEL ONE-KEY FSAGES125
- Page 1 OPERATOR'S MANUAL Cat. No. M18 FSAGES125 M18 FUEL™ ONE-KEY™ 125 MM (5") DUAL-TRIGGER BRAKING ANGLE GRINDER WITH DEADMAN PADDLE SWITCH WARNING To reduce the risk of injury, user must read and understand operator's manual.
-
Page 2: General Power Tool Safety Warnings
GENERAL POWER TOOL • Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left SAFETY WARNINGS attached to a rotating part of the power tool may Read all safety warnings, instruc- WARNING result in personal injury. - Page 3 The dimensions of the accessory mounting • • When battery pack is not in use, keep it away must fit the dimensions of the mounting from other metal objects, like paper clips, coins, hardware of the power tool. Accessories that do keys, nails, screws or other small metal objects, not match the mounting hardware of the power tool that can make a connection from one terminal...
- Page 4 For example, if an abrasive wheel is snagged or • When using dual purpose wheels always use pinched by the workpiece, the edge of the wheel the correct guard for the application being per- that is entering into the pinch point can dig into the formed.
-
Page 5: Functional Description
• Maintain labels and nameplates. These carry their life must collected important information. If unreadable or missing, separately returned contact a MILWAUKEE service facility for a ® environmentally compatible recycling replacement. facility. Some dust created by power sanding, WARNING FUNCTIONAL DESCRIPTION... -
Page 6: Specifications
To install the Type 1 clip-on guard, slide the Type Recommended Ambient 1 clip-on guard over the Type 27 guard until it Operating Temperature ....-17°C to 51°C clips into place. Recommended Lanyard....MILWAUKEE ® Energy Absorbing ASSEMBLY Recharge only with the charger WARNING specified for the battery. - Page 7 Inspect the parts for Installing Backing Pad and Sanding Discs damage. Replace needed. only Remove battery to avoid starting MILWAUKEE mounting hardware designed for ® WARNING the tool. this tool. 2. Wipe the accessories, disc nut and spindle to 4.
-
Page 8: Operation
Never grind without proper safety equipment. comes to a complete stop before laying it down. Mode Selector Button Using Grinding Wheels MILWAUKEE Grinders have a speed selection ® The guard type must match the panel located at the end of the handle to set the... - Page 9 Test wheel for balance and loose or damaged wires Using Cut-Off Wheels by letting it spin for one minute before applying it to Cut-Off Wheels are suited for small cut-off and the workpiece. During this time, no one should shallow notching operations only. stand in front of or in line with it.
-
Page 10: Troubleshooting
Return the tool, battery pack, and charger to a MILWAUKEE service facility for repair. ® After six months to one year, depending on use,... - Page 12 Australia and New Zealand. SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE ® prides itself in producing a premium quality product that is Nothing But Heavy Duty Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE ®...