Mirus for H2/H3 Graingage User's Guide
Setup Parameter
Test Weight
Tare Warning
Note: To edit other test weight settings,
Configure Moisture Sensors
Note: This option is only available with the H2 GrainGage.
On the Setup > H2 GrainGage > Sensors screen,
1.
Tap Moisture.
Mirus opens the Moisture Sensor Setup screen where you can configure the moisture
setting for the GrainGage.
2. Mirus and GrainGage Setup
Test Weight Sensor Settings
Default Value
A tare warning is generated when a tare check
2.02 lb/bu
indicates weight in the chamber is above this
2.6 kg/hL
threshold.
see Calibrate Test
Moisture Sensor Settings
Description
Weight.
26