Vident iODO Master520 Quick Reference Manual

7
Car

VCI Connection

For Android devices, tap Bluetooth
icon near the top right of the Home
screen under iSmartDiag app. For
the iOS devices, tap Setting >
Bluetooth on your iOS device to
open the Bluetooth function. Then
tap the Bluetooth icon under
iSmartDiag app on the screen to
pair it with the device. The Bluetooth
name starts with VD.
Ensure your device's Bluetooth
is turned on.
When the device is successfully
paired with the dongle, the
Bluetooth icon on the iSmartDiag
app will turn to green.

UPDATE

Software: The diagnostic software can be downloaded through Management
> Update. When a new version is available, an Update button will display.
Tap the button to update the software.
VCI Firmware: Tap Setting > VCI Management > VCI UPGRADE to update
the firmware if a new version is available.

PRINT

1.For iOS devices, the saved report can be printed via the Print function on
the device.
2.For Android devices, download and install a third-party Print app to print the
saved report.
NOTE: The device needs to be connected with a printer to print.
For service and support, please contact us.
Http://www.videnttech.com / support-online@videnttech.com /
0086-755-2830-5016
@Shenzhen Vident Technology Co.,Ltd. All Rights Reserved.
8
Finish Installation
Your iSmartDiag scan tool
dongle is now ready for use.
Quick Reference Guide