In the box 1080p Doorbell Camera Mounting Bracket Removal Tool Micro-USB Cable User Manual Wireless Chime Indicator light Indicator Light Flashing RED The device is disconnected from Wi-Fi. It will attempt to reconnect automatically. If it fails, please reset the device and pair it again in the app.
Page 4
Solid RED The device is charging. RED Light Turns OFF When the device is fully charged. Recharge your doorbell Remove the mounting bracket To do this, insert the included mounting bracket removal tool into the hole at the top of the doorbell. Push in until the bracket slides off.
Page 5
2. Remove the battery tab Recharge Your Doorbell Before First Use a standard micro-USB cable, such as the one provided in the box. Simply plug it into any 5V1A USB power source. Your doorbell camera may take approximately 8-10 hours to fully charge, depending on whether the USB cable is connected to a USB port or a wall outlet.
Page 6
Create an account in the Aiwit app Scan the QR code provided or search for Aiwit in the Apple App Store or Google Play. Then download and install the app. Android/iOS App Download 2. Open the Aiwit app on your cellphone and tap Sign up. v2.7.4 (3752) Login Sign up...
Page 7
Enter your email address, set a password, and tap Sign up. Tap Please log in. (Note: You will also receive an email containing an activation link. Access this email and tap on the Activate Account link to verify.)
Page 8
Open the Aiwit app and sign in to your account. To add your camera, tap the Add device icon (+). Choose Video Doorbell and then select the M50 model. Press and hold the doorbell button until the red light starts flashing. You will hear Entering pairing mode.
Page 9
Install your doorbell Remove the mounting bracket To do this, insert the included mounting bracket removal tool into the hole at the top of the doorbell. Push in until the bracket slides off. Prepare for mounting Mark the drill holes and use a bit to drill into your wall.
Page 10
Reattach the doorbell Place the doorbell back on by slotting it in at the bottom and clicking it into place. How to reset your doorbell Remove the mounting bracket To do this, insert the included mounting bracket removal tool into the hole at the top of the doorbell. Push in until the bracket slides off.
Page 11
Press RESET button on the back of the doorbell Reset Button Set up your wireless chime Connect the doorbell camera to the wireless chime and receive an instant alert in your home when someone rings the doorbell. The chime plugs into any outlet, allowing you to place it anywhere in your home.
Page 12
Plug the chime into an outlet and press the pairing button Before beginning the setup process, ensure that your video doorbell is connected to your phone. Then, plug the chime into an outlet and press the pairing button. Set up your wireless chime Press the doorbell button to pair it with the chime.
Press the doorbell button Press the doorbell button again to verify that the chime and doorbell are working properly. Please note that the volume of the chime is not adjustable. Frequently asked questions 1. How can I share the device with family members? Open the Aiwit app and tap on Settings .
Page 14
3. How many users can view the device at the same time? The owner account can share the device with up to 8 other accounts. Up to 3 users may view the video feed at once, but only 1 user can use the intercom. 4.
Page 15
7. How can I adjust the human detection accuracy? Open the Aiwit app and tap on Settings. Next, tap on Motion Settings. Here, you can select the desired human detection accuracy from three options: low, medium, and high. We recommend choosing medium.
Page 16
Contact us If you require further assistance, feel free to reach out to service@aiwit.cc our support team. Email us at use the Aiwit app's support feature. Please include your product's model and the retailer's name. Thank you. [图片]...
Page 17
FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications.
Need help?
Do you have a question about the M50 and is the answer not in the manual?
Questions and answers
My camera on the m50 camera is switched off