Table of Contents
Advertisement
Quick Links
Heater Team
Blaze
www.HeaterSports.com
Model No: BPM599C
Serial No.
Write the serial number in the
space above for reference.
ACTIVATE YOUR
WARRANTY
To register your product and
activate your warranty, call
1-800-492-9334
CUSTOMER CARE
For customer service inquiries,
please call our toll free line
at 1-800-492-9334.
CAUTION
Read all precautions and in-
structions in this manual be-
fore using this product. Keep
this manual for
future reference.
Instructions Date: 09/2023
Version: 00001
DO NOT RETURN TO STORE, CALL 1-800-492-9334
OWNER'S MANUAL
Combo Pitching Machine
TM
1
Advertisement
Table of Contents
Related Manuals for Heater Sports Blaze BPM599C
Summary of Contents for Heater Sports Blaze BPM599C
- Page 1 Heater Team OWNER'S MANUAL Blaze Combo Pitching Machine www.HeaterSports.com Model No: BPM599C Serial No. Write the serial number in the space above for reference. ACTIVATE YOUR WARRANTY To register your product and activate your warranty, call 1-800-492-9334 CUSTOMER CARE For customer service inquiries, please call our toll free line at 1-800-492-9334.
-
Page 2: Parts List
PARTS LIST *Call Heater Sports at 1-800-492-9334 To Order Replacement Parts. Legs Tripod Leg Assembly (9 Total) Bottom Leg (A): 3x Middle Leg (B): 3x Top Leg (C): 3x Tripod (D) Hardware Pack: Tripod Assembly Large Locknut Hex Bolt Small Flat Washer... -
Page 3: Exploded View Assembly
EXPLODED VIEW ASSEMBLY R (9" Baseball) S (11" & 12" Softball) *Pre-Installed Pushpin Pushpin Hole Pushpin Hole *IMPORTANT: Make Sure This Leg Points To The Front of Pushpin Machine www.HeaterSports.com 1-800-492-9334... - Page 4 S P R I NG L O A D E D H A ND L E N OT I C E : P i t c h H e i g h t K n o b ( P a r t H ) i s s p r i n g l o a d e d .
- Page 5 TRIPOD TO HOUSING ASSEMBLY Step 1: Insert Tripod (D) into bracket of Housing (L) and line up holes. Make sure single leg of Tripod lines up with flat side of housing The Two bracket. Legs Point To The Back Outside Left Inside Left Round On Top (4x) Inside Right...
- Page 6 LEG TO TRIPOD ASSEMBLY Step 3: Insert & Lock Pushpins of Legs A, B, and C (3 times) together. Baseball Setup Step 4a: Insert assembled leg sections into Tripod with the rubber tip installed on the bent leg and the bent leg touching the ground. Pushpin Pushpin Hole...
- Page 7 PINCH PAD & CHUTE ASSEMBLY Step 7: Insert Pinch Pad (Q) into housing and tighten Knob (P) into pre-deter- mined 9", 11", or 12" ball type hole. *Make sure Knob is screwed down tight and fully inserted into hole. Slide Pinch Pad To Desired Ball Size And Tighten Knob...
-
Page 8: Assembled View
ASSEMBLED VIEW Baseball Setup Part# R (9" Baseball Chute) Ball Exit *IMPORTANT: Single Leg Handle Must Be Goes To Front Installed On This Side Of Tripod. Of Machine Softball Setup Part# S (11" & 12" Softball Chute) www.HeaterSports.com 1-800-492-9334... - Page 9 NEVER USE OR LEAVE THE MACHINE IN RAIN/MOISTURE. DOING SO CAN RUIN THE MACHINE & VOID ITS WARRANTY. HEATER SPORTS RECOMMENDS USING HEATER PITCHING MACHINE BALLS IN THIS MACHINE. THESE BALLS HAVE BEEN PRECISELY CRAFTED TO PROVIDE YOU WITH HOURS OF ACCURATE, TROUBLE FREE BATTING AND FIELDING PRACTICE. OTHER BRAND OF BALLS HAVE NOT BEEN TESTED IN THIS MACHINE AND CANNOT BE VALIDATED AS SUFFICIENT AND SAFE.
-
Page 10: Pre-Operation
PRE-OPERATION WARNING: The Blaze Combo pitching machine is intended for use by operators who are at least 18 years of age and who have been educated about the safety precautions and operations of the machine. WARNING: Do not attempt to operate this machine until you have read thoroughly and understand completely all instructions, safety rules, machine labels, etc. - Page 11 Do not modify the plug provided. Improper connection of the equipment-grounding con- ductor can result in a risk of electric shock. If repair or replacement of the electric cord or plug is necessary, contact Heater Sports for proper power cord replacement and instructions.
-
Page 12: Operation
Extension Cords Use only 3-wire 16 AWG or larger grounding type extension cords that have 3-prong ground- ing plugs and 3-pole receptacles that accept the machine’s plug. When using the machine at a considerable distance from a power source, use an extension cord heavy enough to carry the current that the machine will draw. - Page 13 > Out-of-round, soft, mushy, or wet balls will affect accuracy of pitches and must not be used. Mixing different types of balls (leather, rubber, etc.) will affect consistency of pitches. For best accuracy, throw only one type of ball at a time. >...
-
Page 14: Maintenance
Heater Sports. Thank you for purchasing your Blaze Combo Pitching Machine. For any questions, com- ments, or needs please contact Heater Sports any of the following ways: Heater Sports 95 West 650 South St.
Need help?
Do you have a question about the Blaze BPM599C and is the answer not in the manual?
Questions and answers