QJMOTOR LTR150 2024 Owner's Manual

Hide thumbs

Table of Contents

Quick Links

Download this manual

Table of Contents

Summary of Contents for QJMOTOR LTR150 2024

Page 2 PREFACE Welcome to the world of motorcycling! As the owner, you are benefiting from the vast experience and newest technology regarding the design and manufacture of high-quality products, which have earned us a reputation for dependability. Please take the time to read this manual thoroughly, so as to enjoy all advantages of your vehicle.
Page 3: Important Notes
IMPORTANT NOTES 1． Rider and passenger The motorcycle is designed to be used by only one rider and one passenger. 2． Road conditions for riding This motorcycle is suitable for riding on-road. 3. Please read this operation and maintenance manual carefully. Following the break-in instructions in this manual will keep your motorcycle running stably and allow the engine to reach its full performance.
Page 4: Special Notice
SPECIAL NOTICE Warning: this motorcycle is equipped with a main fuse that must meet the standard requirements to run safely. DO NOT use fuses of incorrect specifications or other conductive objects; otherwise it will lead to damage to parts, fire, and/or a serious accident. Pay special attention: *When installing or replacing the battery for the first time, pay attention to distinguish between positive and negative connections.
Page 5 QJMOTOR Motorcycle will not bear all quality problems and consequences (including loss of warranty) caused by users' unauthorized modification or installation of unauthorized parts. The user is requested to comply with the regulations of the traffic management department on the use of vehicles.
Page 7 Safety Information 10. The configuration of accessories must not affect the driving safety Safe riding tips and operating performance of the motorcycle, especially the overload of 1. The vehicle must be inspected before driving in order to electrical systems will easily cause danger. avoid accidents and damage to the vehicle.
Page 8: Parts Location
Motorcycle Serial Number Parts Location Frame numbers and engine numbers are used to register motorcycles. When ordering accessories or requiring special services, this number enables the distributor to provide you with better service. Please record the number for reference. ①Frame number: engraved at the end of the frame (under the seat).
Page 9 Meter & Indicators LTR150 model status (1) Left turn signal indicator or left and right turn signal indicator (optional) a ○ If the model you choose is a non-ABS braking model: this graphic symbol is a left steering signal light indicator.
Page 10 (3) Engine failure indicator: "C" position indicates a low coolant temperature, and the When the ignition switch is switched on, the engine "H" position indicates a high coolant temperature. (6) Fuel gauge: fault indicator light will come on and the fuel pump will Represents the amount of fuel in the fuel tank.
Page 11 (9) Left function button A: Displayed A (left button) Results Function Power Supply TOTAL <3 seconds TRIP A TRIP A <3 seconds TRIP B Mileage function switching TRIP B <3 seconds TOTAL TRIP A or TRIP A or TRIP B >3 seconds TRIP B zero clearance Speedometer and odometer Unit switching...
Page 12 stop met at the same time activated, indicator light 1. Engine cylinder head temperature > 149°F temporarily in a uniform flashing state 2. Throttle < 1.5% until the mode is switched. 3. Speed < 3mph, status duration 3 seconds 4. System voltage > protection voltage of electric cell Note: after the above four items are satisfied at the same time, the automatic stop function is performed.
Page 13 when the "key handle switch" is returned to the Note: "OPEN" position. After opening the seat, and you are done removing or "ON" Mark: Turning the key to the "ON" marked position, placing items inside, be sure to return the lock switch the power is turned on, the engine can be started, and the knob to the "OFF"...
Page 14 4. front brake lever 2. Hazard light switch Pull the front brake lever with your right hand slowly " "" Mark: When the light switch button is in the " " as you brake. When the brake lever is pulled, the brake marked position, the left and right turn signal lights flash and blink at the same time, warning of danger.
Page 15 of the vehicle, which can be used to charge components 2. horn switch such as mobile phones. When the ignition switch is in the " " position, press the Storage box horn button and the horn will sound. The storage box is located directly below the seat. 3.
Page 16 abnormal, the ignition is abnormal, can be idle stepping maintenance-free battery, battery specification is 12V/8.6AH. motor failure / SSCU abnormal ECU anomaly. (2) The battery is installed below the foot board. (3) To remove the battery: turn off the ignition switch, 3.
Page 17 too cold charging fuse battery contact bad SSCU charging Warning: connector is not reliable SSCU abnormal Irregular operation of the engine starting procedure 8. Suddenly flameout while driving, at the same time the fault may pose a danger. If the unit is not supported by the lights flicker, check the train of thought as follows: center stand when starting the engine, turning the throttle Over current: short circuit coil short circuit SSCU anomaly...
Page 18: Setting Off
Setting Off 2. Maintenance note: if in the process of vehicle maintenance, maintenance personnel are allowed to (1) Retract the center stand or side stand operate the electric starting button for a long period of Push the vehicle forward and the center stand support time, each time up to 10 seconds, with a attempt interval will retract automatically.
Page 19 the engine. Please keep it below 35 miles per hour and (3) Slowly rotate the throttle rearward, the motorcycle will begin to move forward avoid rapid acceleration. Follow the table below: Warning: Mileage mi 0-185 185-300 300-685 685-930 Throttle control grip should not be rotated quickly to prevent the vehicle from suddenly taking off.
Page 20 (8) Do not brake or turn aggressively Support the center stand on a flat surface, do not hinder Emergency braking or sharp turning is the main cause of traffic, if the terrain is uneven, the vehicle can easily fall. slippage and crashes, which is very dangerous. The left hand grasps the handlebar, the right hand (9) Drive very carefully on rainy days &...
Page 21: Pre-Ride Inspection
Warning: "Free play" refers to the distance between the end of the After reinserting the spark plug into the cap keep it brake handle and the braking action. The brake lever far from the spark plug hole while checking spark, if the should not only have appropriate free play, but also plug is too close to the opening it could ignite the fuel operate smoothly and without binding.
Page 22 4. front brake pads The fuel is enough to drive as planned. Always check whether the wear of the brake pads has When the fuel meter is close to the E mark, it means that there is not enough fuel in the tank. Please replenish the reached the limit mark 1.
Page 23 quality regularly replace class and is of high cleanliness and performance. The performance and durability of the engine. Regular inspection factory recommended model is SJ 10W-40. Priority of oil levels and regular oil replacement are two important should be given to the use of high performance name tasks that must be performed during maintenance intervals.
Page 24 The steps for oil replacement are as follows: (oil have your dealer inspect your motorcycle. replacement should take place when the engine is warm) Brake light inspection (1) Support the motorcycle with the center stand on Turn the ignition switch to the " "...
Page 25 Exhaust pipe inspection Please replace the new tire when the tire cracks or the deep wear of the tire groove reaches the limit. Check if the exhaust pipe is loose or the exhaust noise The depth of the pattern on the crown pattern of the tire is high.
Page 26: Maintenance Inspection
height reaches the MAX mark. gear oil. Warning: Replace it every six months or 3000mi. The recommended gear oil is GL-5 class 85W/90. After vehicle operation, because the coolant temperature The total capacity of gear oil is 140ml. is very hot, the coolant is under extreme pressure, do not Check the gear box for oil leakage after inspection.
Page 27 The main points of specific lubrication and maintenance small metal wire brush or spark plug cleaner, the electrode gap must be readjusted and the gap measured using a are shown in the figure below: Motorcycle lubricating oil Grease spark plug gap tool. The measured spark plug gap should (1) side stand support and spring hook be kept between 0.8~0.9mm.
Page 28 The idle speed of your motorcycle will be reduced Follow the diagram to the right when connecting parts due to pollution of the throttle body, the throttle valve of the fuel system after a service or part replacement. ⑻ Tires body should be cleaned once every 3100mi.
Page 29 damaged, if the LED headlight needs to be replaced, please contact your dealer for assistance. Warning: Note: Tire pressure and wear state are very important to When replacing light bulbs, it is necessary to use a the function and safety of your vehicle. Please check the bulb of the same specification as the one removed.
Page 30 regulated wet load free battery, it is sealed. DO NOT Be sure to turn off the ignition switch (key) when checking or replacing the battery. remove the pressed in top cap! If the voltage is less than 12.6V before use, the charging voltage is 14.5V, the To replace the battery, please pay attention to the charging limit current is 8.6A, and the charging is reduced following:...
Page 31 the rear wheel. If the air filter is blocked by dust, the intake firmly in their original position and is properly sealed. resistance increases and the output power decreases, while Warning: When replacing the paper core filter be sure it isn't the fuel consumption increases.
Page 32: Storage Guidelines
faulty catalytic converter can pollute the air and hinder If the ABS wheel speed sensor is damaged, the ABS your engine performance. If the silencer and other indicator will always be on and the ABS will not parts need to be replaced, remember to use genuine QJ work.
Page 34 Maintenance schedule Schedule Key: Odometer reading I: inspection, cleaning, adjustment, lubrication or 600mi 2500mi 3700mi 5000mi 6200mi replacement as appropriate C: cleaning Fuel system R: replacement Throttle operation * Must be overhauled by the dealer, the owner Air filter (note 2) Replacement every 2500mi provides his own qualified tools and maintenance Spark plug...
Page 35: Emission Control System Warranty
Emission Control System Warranty parts and labor. If an emission-related part on your vehicle is defective, Below is the emission control system warranty printed the part will be repaired or replaced by Hua Mei. This is in the owner’s manual, a copy of the owner’s manual is your emission control system DEFECTS WARRANTY.
Page 36 and responsibilities, you should contact contact United States Environmental Protection Agency and the Hua Mei Motor USA LLC, 270 TRACE COLONY PARK STE B, Ridgeland, MS 39157, California Air Resources Board. Any part or parts replaced under TEL: (866) 222 -1558 or (for California registered highway this warranty shall become the property of Hua Mei.
Page 37 (1) Accident, consequential or exemplary arising in connection with the (2) Misuse, sale or use of or inability to use the vehicle for any purpose. (3) Repairs improperly performed or replacements Some states do not allow the exclusion or limitation of any improperly installed, incidental or consequential damages, so the above (4) Use of replacement parts or accessories not...
Page 38 VI. ADDITIONAL INFORMATION. Any replacement part that is equivalent in performance and durability may be used in the performance of any maintenance or repairs. However, Hua Mei is not liable for these parts. The owner is responsible for the performance of all required maintenance. Such maintenance may be performed at a service establishment or by any individual.
Page 39: Reporting Safety Defects
If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National High way Traffic Safety Administration (NHTSA) in addition to notifying QJMOTOR. If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.
Page 40: California Proposition 65 Warning
California Proposition 65 Warning Operating, servicing and maintaining a passenger vehicle or off-highway motor vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle.
Page 41 Part Number: 02401K140003...