Advertisement
1pc - P1 Main Cabinet
2pcs - P2 Leg Baseplate
STEP 3
Attach the P2 Leg Baseplate onto the P3 Middle Leg and P5
Bottom Leg using the H2 Hex Head Bolt,H3 M8 Flat Washer and
H4 M8 Lock Washer as shown in FIGURE 3.
Tighten H2 bolts using the T1 Socket
Head Wrench.
FIGURE 3
WHILE FLIPPING THE TABLE OVER, DO NOT ALLOW TABLE
TO REST ON THE SIDE OF LEGS AS THIS COULD DAMAGE THEM.
VERY CAREFULLY TURN THE TABLE OVER AND SET IT ON
ITS LEGS. BE CAREFUL. THE TABLE IS VERY HEAVY.
HOLD TABLE
PARTS REQUIRED
THIS STEP REQUIRES FOUR OR MORE ADULTS.
CABINET
8pcs - H2 Hex Head Bolt
8pcs - H3 M8 Flat Washer
8pcs - H4 M8 Lock Washer
H2
H4
H3
P2
P5
DO NOT
TABLE ON ITS LEGS!
HOLD THE
LEGS
6
P5
H2
H3
H4
DO NOT LEAN THE
H2
H4
H3
H2
H4
P2
H3
P3
Advertisement
