Advertisement
Quick Links
Advertisement
Summary of Contents for Kaiser SUA-8448KW
- Page 1 TABLE HOCKEY Model#SUA-8448KW...
-
Page 2: Hardware Identifier
HARDWARE IDENTIFIER (To Scale) （Not to Scale) H1 - 8mm x 130mm Hex Head Bolt T1 - Socket Head Wrench (8 pcs) (1 pc) H2 - 8mm x 40mm H3 - M8 Flat Washer H4 - M8 Lock Washer Hex Head Bolt (28 pcs) (28 pcs) (20 pcs) - Page 3 ACCESSORIES IDENTIFIER (Not to Scale) A1 - Striker A2 - Puck A3 - Felt Pad (2 pcs) (2 pcs) (2 pcs) NOTE: A3 Felt Pads may already be attached to A1 Strikers Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
- Page 4 PARTS REQUIRED 1pc - P1 Main Cabinet 12pcs - H2 Hex Head Bolt 2pcs - P3 Middle Leg 12pcs - H3 M8 Flat Washer 2pcs - P4 Upper Leg 12pcs - H4 M8 Lock Washer STEP 1 Attach the P4 Upper Leg, P3 Middle Leg onto the P1 Main Cabinet using the H2 Hex Head Bolt,H3 M8 Flat Washer and H4 M8 Lock Washer as shown in FIGURE 1.
- Page 5 PARTS REQUIRED 1pc - P1 Main Cabinet 8pcs - H2 Hex Head Bolt 2pcs - P2 Leg Baseplate 8pcs - H3 M8 Flat Washer 8pcs - H4 M8 Lock Washer STEP 3 Attach the P2 Leg Baseplate onto the P3 Middle Leg and P5 Bottom Leg using the H2 Hex Head Bolt,H3 M8 Flat Washer and H4 M8 Lock Washer as shown in FIGURE 3.
- Page 6 Customer Service Parts...
-
Page 7: Electronic Connections
ELECTRONIC CONNECTIONS C1. Sensor with Short Wire C6. Blower with A/C Cord C2.Sensor with Long Wire C3. Control Box C5. Scorer IMPORTANT: Plug into wall outlet. Do not allow cord to be a trip hazard. NOTE: ON/OFF switch is attached to the air fan motor cord. - Page 8 LED SCORING OPERATING...