Table of Contents
Advertisement
Data Copy by USB Memory
Purpose
a) Board replacement (Copy the data when exchanging A-board):
When exchanging A-board, the data in original A-board can be copied to USB Memory and then copy to new A-board.
TV
A-board
b) Hotel (Copy the data when installing a number of units in hotel or any facility):
When installing a number of units in hotel or any facility, the data in master TV can be copied to USB Memory and the
copy
to other TVs.
Master TV
USB
Memory
Copy to USB Memory
Preparation
Make pwd file as startup file for (a) or (b) in an empty USB Memory.
1.
Insert an empty USB Memory to your PC.
2.
Right-click a blank area in a USB Memory window, point to New, and then click text document. A new file is created
by default (New Text Document.txt).
3.
Right-click the new text document that you just created and select rename, and then change the name and
extension of the file to the following file name (a) or (b) and press ENTER.
File name:
(a) For Board replacement: boardreplace.pwd
(b) For Hotel: hotel.pwd
Note:
Please make only one file to prevent the operation error.
No any other file should be in USB Memory.
(Before exchanging)
Copy to USB Memory
(After exchanging)
Copy back from USB Memory
Other TV
Other TV
Copy from USB Memory
Following data can be copied.
User setting data
(inc. Hotel mode setting data)
Channel scan data
USB
Adjustment and factory preset data
Memory
Other TV
17
Following data can be copied.
User setting data
(inc. Hotel mode setting data)
Channel scan data
Advertisement
Table of Contents
