Sony DTC-87ES Operating Instructions Manual page 11

REPEAT indicators
REPEAT 1: Lights when a desired selection is played
back repeatedly.
REPEAT ALL: Lights when all the selections are played
back repeatedly.
REPEAT A-B: Lights when a desired portion is played
back repeatedly.
[9] STEP/PGM NO. indicator
Shows the program number of the selection being played.
When programming the desired selection in the RMS
operation (page 39), the display shows the step number
of the programmed selection.
AMS (Automatic Music Sensor)/RMS (Random
Music Sensor) indicators
Show the number of selections to be skipped ahead or
behind inthe AMS operation. When designating aselection
directly by the numeric button and the » button, the
display shows the program number of the target selection
while the selection is being searched for. When
programming the desired selections in the RMS operation
(page 39), the display shows the program number of the
selection to be programmed.
[1] CAUTION indicator
Lights when moisture condensation occurs. Ifthis happens,
the deck stops functioning automatically. (See page 4.)
[2] MUSIC SCAN indicator
Lights after pressing the MUSIC SCAN button to listen to
the beginning of each selection successively.
fel
FADE IN/OUT indicator
FADE IN: Blinks when recording or playback fades in.
FADE OUT: Blinks when recording of playback fades out.
(14) Indicator of the input selector
The OPTICAL or COAXIAL indicator lights according to
the position of the INPUT selector. No indicator lights when
the INPUT selector is set to ANALOG.
SKIP ID indicator
Lights when writing or erasing a skip ID code or when the
skip ID is detected during playback.
START ID indicator
Blinks when writing (for 9 or 18 seconds) or erasing a start
ID code, and lights when the start ID is detected during
playback.
END ID indicator
Blinks when writing (for 9 or 18 seconds) or erasing a end
ID code, and lights when the end ID is detected during
playback.
TIME SEARCH indicator
Lights when searching the desired position of a tape by
giving the time elapsed from the beginning of the tape.
REHEARSAL indicator
Lights while the rehearsal function is activated (page 27).
20] MARGIN indicator
Shows how much margin there is between the peak level
of input audio signal and 0 dB.
Frequency map indicator
Bars indicating the sampling frequencies with which the
tape was recorded appear on the peak level meters.
(Refer to page 33.)
Peak level meters
Indicate the peak value of the audio signal being recorded
when the REC MONITOR switch is set to SOURCE or the
peak value of the audio signal recorded on the tape when
the REC MONITOR switch is set to TAPE.
Time indicator
Indicates the tape running time, absolute time, elapsed
time of the current selection, remaining time or recording
day. Each time the COUNTER TIME button is pressed, the
display is changed.
REMAINING (remaining time): Lights when the counter
shows the remaining time of the tape.
PGM TIME (program time): Lights when the counter shows
the elapsed time of the current selection.
ABS TIME (absolute time) indicator: Lights when the
counter shows the elapsed time from the beginning of
the tape.
COUNTER indicator: Lights when the counter shows the
tape running time.
MEMORY indicator: Lights when the MEMORY function
can be performed in the COUNTER mode.