Cleaning The Debris Filter - Samsung VRT PLUS WE357 Series User Manual

CLEANING THE DEBRIS FILTER
We recommend cleaning the debris filter when water does not drain well or the "nd" error message is displayed.
1. Unplug the washing machine from the power supply.
2, Open the filter cover using a coin or a key.
Filter €over_% /
3, Holding the drain cap, pull the drain tube that
is hooked on the guide hook to the front.Do
not pull the drain tube with excessive force.
4, Place a bowl under the washing machine
to catch any remaining water. Then, hold
the drain tube with one hand, and turn the
emergency drain cap counter clockwise with
the other hand to separate it from the drain
tube.
5, Drain the remaining water completely.
Step 1 Step 2
6. Pull out the debris cap and debris filter assembly.
7=
Debris fiiter cap, @i! i
i
Wash any dirt or other material from the
debris filter. Make sure the drain pump
propeller behind the debris filter is not
blocked.
...... /,
Debts f terl=..=' ' ,
',U,''---tDebris filter
cap
8. When you have finished cleaning the filter, insert the debris
cap and filter assembly back into the washer. Turn the
debris filter cap clockwise until the indicator on the debris
filter cap is in the 12 o'clock position, pointing to the
indicator on the washer.
9. Re-attach the emergency drain cap to the drain tube, and
then hook the tube to the hook guide.
10. Re-install the filter cover the filter cover.
maintainng your washer 33