Panasonic PalmCam SuperDISK PV-SD4090 Operating Instructions Manual page 27

Set Digital Camera to beep (low or high
volume), when an image is captured, or
set to OFF.
_Before you begin
Set the POWER Switch to REC, MANUAL |
REC or PLAY. (See pages 19-20,) Press
J
MENU to display the MENU screen.
I=]=ld_;
I=]¢1¢1_
1
2
!
• You can select BEEP mode in the REC,
MANUAL REC and PLAY mode.
• If you change the setting, repeat step 2.
1
<REC mode>
Press • or • to select BEEP and
Press • or • to select one of the three
settings shown below.
<MANUAL REC mode>
I <REC MENU 2i2>
• LOW •
SEL :&v SET :41_
EXIT : MENU
<PLAY mode>
I <PLAY MENU 2/_2>
SUDE SHOW
OSD ON
BRIGHTNESS
CLOCK SET
rm_t. •LOW•
SEL :&v SET :41 b
EXIT : MENU
<MANUAL REC MENU 3/3> /
F_FJT_= I • LOWI_
/
SEL : AV SET : • •
L EXIT : MENU /
OFF : Select to turn OFF the beep sound.
LOW : Select to hear a low beep sound.
HIGH : Select to hear a loud beep sound.
Press MENU to exit.
Digital Camera will beep:
• Once when the BEEP is set to LOW or
HIGH in the MENU mode as follows.
When you press the REC MODE, MENU
or FLASH buttons.
When you press the •, •, •, or •
buttons while adjusting Brightness, Iris
and Volume.
When you press the • or • button while
adjusting Brightness, Iris and volume.
• Twice when you press the shutter button
half way to adjust the focus.
27