Roadside Rear Exterior Vehicle Information Labels This manual is a supplement to the original equipment Ford F150 owner’s manual. Information contained in this manual supersedes all applicable text in the F150 owner’s manual. Customer Information PART# 49013981 GOE OPER C250 MORG/OLS...
C250 INSTRUMENT PANEL INSTRUMENT PANEL HEADLIGHTS GEAR SHIFT Two-Wheel High - Standard for The gear shift system features a manual on-road driving shift mode. The manual shift mode can Four-Wheel High - Locked be selected by pressing the (M) button...
Page 4
C250 INSTRUMENT PANEL INSTRUMENT PANEL Mode Sources: Press the MODE button SWITCHING THE IGNITION TO RADIO to switch between AUX, FM, AM, and ACCESSORY MODE GENERAL RADIO OPERATIONS When the ignition is off, press the push Bluetooth (BT MUSIC). Volume Up/Down...
Page 5
C250 INSTRUMENT PANEL INSTRUMENT PANEL CAB CONTROLS CAB CONTROLS CLIMATE CONTROLS (cont.) Heated Mirror - Press to toggle the Left/Rear/Right Roll-Up Door Lights SETTING THE BLOWER MOTOR SPEED Press to toggle on or off. The lights heated mirror control. Will turn off...
C250 INSTRUMENT CLUSTER INSTRUMENT CLUSTER ENGINE OIL WHAT IS DISTANCE TO EMPTY Indicates the approximate distance your vehicle can PRESSURE GAUGE travel on the fuel remaining in the tank. Changes in Indicates the engine oil pressure. driving pattern can cause the value to not only decrease Note: This is a configurable gauge.
Page 7
C250 INSTRUMENT CLUSTER Instrument Cluster Warning Lamps Four-Wheel Drive Powertrain Malfunction, Reduced Power, See page 2 for more details. Electronic Throttle Control, Check 4X4 Note: Some indicators appear different WHAT ARE THE INSTRUMENT CLUSTER Door Ajar Illuminates when the powertrain or four-wheel It illuminates when you switch the ignition on depending on vehicle options.
Page 8
C250 INSTRUMENT CLUSTER Instrument Cluster Display TRIP COMPUTER Press to go back or to exit a menu ACCESSING THE TRIP COMPUTER USING THE INSTRUMENT CLUSTER Press to make a selection Using Select Screens CHANGING THE TIRE PRESSURE UNIT DISPLAY CONTROLS 1.
Page 9
CAB FEATURES Cab Features Neutral Mechanical Override POWER WINDOWS The C250 features a manual transmission override, PARKING BRAKE mounted to a leg below the center stack of the instrument panel. This can be used to shift the transmission into To engage the parking brake, pull on the parking neutral without vehicle power if the vehicle needs to be brake switch.
Page 10
Failure to follow this warning could result in serious personal injury or death. The airbag system in the C250 is not functional. The label covering the airbag indicator on the steering wheel must not be removed. All occupants, including the driver, should always wear their seat belts assemblies whether or not an air bag is also provided at their designated seating position to minimize the risk of severe injury or death in the event of a crash.
Page 11
Proper location Top Lever of shoulder belt: and can result in injury or death to occupant. NOTE: The seat belts installed in the C250 do not have Belt must be centered Bottom Lever pretensioners or an automatic locking mode. on your shoulder and...
Page 12
TOWING KIT possible. Make sure that you remain comfortable. The C250 has towing capability, but does not come with a hitch. If you want to enable towing, contact High-speed wipe Morgan Olson for a trailer tow kit.
Page 13
C250 CAB FEATURES *Vehicle Tray System (VTS) *if equipped Fuel Funnel Exterior Lighting Control *FOLD-DOWN MAIL TRAY When refueling the vehicle fuel tank from a fuel container, use USING THE HIGH BEAM HEADLIGHTS the fuel filler funnel included with your vehicle, located behind the driver side seat.
C250 KEYLESS OPERATION SWITCHING THE TURN SIGNAL LIGHTS REAR TAIL LIGHTS Keyless Operation ON AND OFF Top Brake Light KEYLESS ENTRY The cab and cargo doors are controlled by a remote The cab doors automatically lock after being control keyless entry system fob. Mechanical keys are also closed.
Page 15
CURBSIDE ROLL-UP DOOR REAR ROLL-UP DOOR CURBSIDE FRONT EXTERIOR ROAD SIDE REAR EXTERIOR To open the door, unlock the door, rotate the handle To open the door, unlock the door, rotate the handle clockwise, and lift the door. clockwise, and lift the door. CURBSIDE ROLL-UP DOOR LIGHT REAR VIEW CAMERA Automatically turns on when door is open and turns...
Modifications and updates to the cargo system or load CARGO SHELVING INDICATOR The traction control system helps to avoid drive wheel compartment must be approved by Morgan Olson. If the indicator does not illuminate when you EXTENDABLE REAR spin and loss of traction.
Page 17
C250 VEHICLE SYSTEMS CONTROLS Stability Control TORQUE VECTORING BY BRAKES SWITCHING STABILITY CONTROL ON AND If a driving condition activates either the stability control Torque vectoring control applies brake torque on the or traction control you may experience the following...
Page 18
C250 VEHICLE SYSTEMS CONTROLS Stability Control and Traction Control with Roll Stability Control Starting and Stopping the Engine - Troubleshooting STARTING AND STOPPING THE Powertrain Warning Lamp Stability Control Roll Stability Electronic Traction Control ENGINE – WARNING LAMPS If it illuminates when the engine is running, this...
C250 MAINTENANCE Hood Release Maintenance OPENING AND CLOSING THE HOOD Tire Model General Grabber APT All-Weather 265/70/R18 Make sure that you fully latch the hood Tire Pressure 331 kPa (48 psi) Front / 331 kPa (48 psi) Rear before driving. Failure to follow this instruction could result Engine Oil Motorcraft®...
Page 20
Maintenance REPLACING THE FRONT WIPER BLADES SEAT BELT SYSTEM Mileage Interval Operations A Morgan Olson 28” wiper blade (part # 49013555) is AND TETHER MAINTENANCE used in your vehicle. every Rotate the tires, inspect tire wear and measure tread depth Any seat belt system that shows cuts, fraying, extreme, or Change oil and filter: Gas engine;...
C250 HEADLIGHTS Headlights 4. Align the selected adaptor to the aiming pads. Move 5. Adjust the rods to the required number position. the adjustment rod for each pad until it agrees with the To adjust, turn the rods to the neutral position, and HEADLIGHT AIMING number located next to the pad as shown below.
Page 22
C250 HEADLIGHTS HEADLIGHT AIMING 7a. Attach each aimer to headlight by pushing the piston handle forward, then engaging the rubber (CONT.) suction cup. 6. Place the aimers with the adaptors onto the headlights. If the adjustment rods do not touch the aiming pads, use the extension studs to provide proper reach for the vacuum cup, or remove one or both of the extension studs.
Page 23
C250 HEADLIGHTS TO SET HEADLIGHT HORIZONTAL AIM TO SET HEADLIGHT VERTICAL AIM B4A AIMER 1. Set the horizontal aim knob to zero, and 1. Set the vertical aim knob to zero. check that the split image target lines are 2. Turn vertical adjusting screw at the top of the...
TIRE PLACARD, AND CANADA POST DATA PLATE The VIN is carried over from the Ford F150, and is displayed injury or death, you should immediately inform Transport Canada and Morgan Olson. Located on the curbside door post near the on the roadside windshield frame through the quarter window.
Page 25
This device complies with Part 15 of the FCC Rules and with ISED Canada license-exempt RSSs. Audio function is replaced with a C250 specific radio (see page 4). The driver cluster display is retained. - The Ford HVAC system is replaced with C250 specific HVAC system and controls (see Operation is subject to the following two conditions: page 5).
Need help?
Do you have a question about the C250 and is the answer not in the manual?
Questions and answers