Advertisement
©Indicates change
©IMPORTANT—START FASTENERS
BY HAND TO AVOID STRIPPING
THREADS WHEN RE-ASSEMBLING
ACCESSORIES
Filter/regulator
& gauge/lubricator.
©TO LUBRICATE
AIR VALVE
MECHANISM
DISCONNECT AIR TO PUMP. REMOVE THE
FOUR COVER SCREWS, COVER PLATE AND
COVER PLATE GASKET.
REMOVE & DISASSEMBLE
THE AIR VALVE
CASTING FROM THE PUMP.
THE AIR VALVE
CASTING
SHOULD
BE
CLEANED OR FLUSHED TO REMOVE ANY
CHIPS, OR OTHER FOREIGN
PARTICLES
PRIOR TO RE-ASSEMBLY.
BEFORE REPLACING THE TOGGLE ASSEM-
BLY, PACK CAVITY WITH GREASE.
USE N.LG.I. No.
1 (LIGHT GRADE) WATER
REPELLENT GREASE. APROX. 1½ OUNCES.
REPLACE
COVER GASKET, COVER, AND
SCREWS. TIGHTEN TO AVOID AIR LEAKS.
PERIODIC
INSPECTION
OF
PARTS
AT
LEAST ONCE EACH YEAR IS ADVISABLE.
Advertisement
