Related Manuals for Eisno EIS-B-RH-SS60-01
Summary of Contents for Eisno EIS-B-RH-SS60-01
- Page 1 通用说明书 于丽 EISNO CH60A-N120 INOX CH90A-N120 INOX 2012.07.25 Cod:0103077303 DD120723XXT01...
- Page 2 Cooker Hood Model EIS-B-RH-SS60-01 EIS-B-RH-SS90-01 Cod:0103077303...
- Page 3 Information and advice must has been used. light a flame oil splashing and becoming a fire hazard. Attention ! Observe the warning in the instruction sheet concerning the operation of the appliance when air is discharged from the room...
- Page 4 Know your cooker hood Please read these instructions Before using your cooker hood Information Congratulations on the purchase of our Cooker hood, which is designed to include many superior features that permit you the fullest expression of your living. Before installing and/or using the cooker hood carefully read all the instructions.
- Page 5 Information and advice Check voltage and Frequency given on the rating plate located on the Information inside of the hood. The air must not be discharged into Rating plate ue that is used for exhausting fumes from appliances burning gas or other fuels (not applicable to appliances that only discharge the air back into...
-
Page 6: Installation
Installation Ensure the power has been turned off before beginning this installation. Information Connect universal hose, easy selecting the venting direction Before installing the cooker hood, please first fix the damper flap on the air outlet of the hoods. - Page 8 screws. other...
- Page 9 The cooker hood is fully convertible for different venting direction. Information The air must not be discharged into a fuel that is used exhausting fumes from Connect the Vertical is the socket above the appliances hose with the most common. If burning gas air duct.
- Page 10 Put the outer chimney on the Installation windshield. work and electrical wiring must be done by qualified person(s) in accordance According to with all the dimension applicable of the chimney codes and standards, fixed bolster, including make sure the fire-rated position of the construction.
- Page 12 Use the Screw ST4*10 to connect the chimney fixed bolster and the upper chimney. Do not touch the light bulb within half Controls: an hour after appliance use. The lamp Press the switch of light to be on,the left and right bulbs light on. shall not be Otherwise the bulbs don't work.When pressing the push button covered...
-
Page 13: Replacing Lamp
Replacement and maintenance If the supply cord is damaged, it must be replaced by the manufacturer its service agent or similarly qualified persons in order to avoid a hazard Replacing lamp Information 1. Take the fixed lamp rim off by unscrewing it in an anti-clockwise direction. 2. - Page 15 The manufacturer shall decline all responsibility if the foregoing recommendations and instruction regarding installation, maintenance and use are not observed and respected when using the cooker hood.
Need help?
Do you have a question about the EIS-B-RH-SS60-01 and is the answer not in the manual?
Questions and answers