Gyroscope
In the event of Gyroscope failure:
•
Inspect physical placement U6150 and their related components on main PCB board (see gyroscope schematic
page on next slide)
•
Connect the board to a display and power the board/display with battery or factory cable.
•
Launch CQA app, test each gyroscope at a time.
•
Look for gyroscope activity on all axis X,Y,Z.
•
As you rotate the board orientation, gyroscope reading will register reading accordingly.
•
When the board is stationary, all gyroscope reading should be 0.
MOTOROLA CONFIDENTIAL
Moto Z Play (Droid)/Moto Z Play
BASEBAND TROUBLESHOOTING GUIDE