Advertisement
Quick Links
MARINA
by
COPY THE MODEL NUMBER FOR YOUR RECORDS HERE #
Please visit us on YouTube and view our shower door installation videos.
One may be available for your installation. www.youtube.com/c/CRAFTANDMAIN
Toll Free Customer Assistance
Monday-Friday, 7:30 a.m. To 5:00 p.m. CST
6241 Northwind Parkway, Hobart, IN USA 46342
USA: www.craftandmain.com
© 2022 FGI Industries, Ltd. | CRAFT + MAIN™, Marina™ and logo designs are trademarks or registered trademarks of FGI Industries, Ltd.
TM
SLIDING
SHOWER & TUB DOOR
READ THE INSTRUCTIONS CAREFULLY
Familiarize yourself with all the parts as shown in the exploded
view. The exploded view will also provide a helpful reference
when relating to the location of the various parts and how
they are mounted.
1-888-620-3667
1-888-256-7551
5970 Chedworth Way, Unit B, Mississauga, Ontario, Canada L5R 4G5
US Customers
Canada Customers
CANADA: www.craftandmain.ca
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Craft+Main MARINA
Summary of Contents for Craft+Main MARINA
- Page 1 6241 Northwind Parkway, Hobart, IN USA 46342 5970 Chedworth Way, Unit B, Mississauga, Ontario, Canada L5R 4G5 USA: www.craftandmain.com CANADA: www.craftandmain.ca © 2022 FGI Industries, Ltd. | CRAFT + MAIN™, Marina™ and logo designs are trademarks or registered trademarks of FGI Industries, Ltd.
- Page 2 1 1/2” Pan Head Screw 3/8” Pan Head Screw 1 1/2” Pan Head Screw - 1 -...
-
Page 3: Part List
PART LIST 1 1/2” PAN HEAD SCREW 3/8” PAN HEAD SCREW (6 pcs) (2 pcs) WARNING: Safety glass should alway be worn when working with tempered glass. RECOMMENDED TOOLS 1/8" (3mm) 1/4" (6mm) - 2 -... - Page 4 INSTALLATION PROCEDURE / STEP 1 / STEP 2 Attach rollers to hanger clips on outside panel (with horizontal towel bar holes). Rollers should be mounted so that the nut that holds it in place is on the same side of the panel as the screw head set into the hanger clip (see inset drawings) .
- Page 5 INSTALLATION PROCEDURE / STEP 3 / STEP 4 / STEP 5 / STEP 6 Measure opening on bottom and cut bottom track (2) 1/8" shorter than opening. Place wall jamb down over bottom track so that the back of the jamb is between the bottom track and the wall.
- Page 6 INSTALLATION PROCEDURE / STEP 7 / STEP 8 Push wall plugs into holes drilled in Step 4 and tap them in with a rubber mallet. NOTE: If you are installing on fiberglass or acrylic, skip this step and discard the wall plugs. 1 1/2"...
- Page 7 INSTALLATION PROCEDURE / STEP 9 / STEP 10 / STEP 11 Use 1 1/2" pan head screws to anchor wall bumper and bumper guide into center hole on each side. Measure opening at top of wall jamb, cut top track (1) 1/16" shorter than opening. Place top track down over wall jambs as shown.
- Page 8 INSTALLATION PROCEDURE / STEP 12 Install outer door panel by lifting up and into top track (1). (Do not lift by towel bar, be careful not to bump panel against metal track.) INSTALLATION PROCEDURE / STEP 13 Insert inner door panel by lifting up and into top track.
- Page 9 INSTALLATION PROCEDURE / STEP 14 / STEP 15 Install towel bar (5A). Install handle (5B). INSTALLATION PROCEDURE / STEP 16 Position panel guide in center of bottom track. Drill two 1/8" holes through screw holes in guide and into bottom track. Position panels in guide as shown in inset drawing and attach guide to bottom track...
- Page 10 INSTALLATION PROCEDURE / STEP 17 Install safe slider clip (9). To install safe slide clip, put install bar into clip and lift onto clip hanger pull down leaving clip in place. TRIM SAFE SLIDER CLIP IF NECESSARY CAULK ALL SIDES SAFE SLIDER CLIP FINAL STEP: Caulk both sides of the shower door frame to seal.
- Page 11 CustomerService.US@FGI-Industries.com 6241 Northwind Parkway 5970 Chedworth Way, Unit B Hobart, IN USA 46342 Mississauga, Ontario, Canada L5R 4G5 © 2022 FGI Industries, Ltd. | CRAFT + MAIN™, Marina™ and logo designs are trademarks or registered trademarks of FGI Industries, Ltd.
Need help?
Do you have a question about the MARINA and is the answer not in the manual?
Questions and answers