Panasonic SC-AK25 Operating Instructions Manual page 27

SOUNDEO
I .
SOUND EO : , w : r 1
PU_I OFFiO_ I! :
• ....
oo ..... .o°°.° .... ,°°°,.°°°.°°° ...... o°,,o°°°°.
®
-o, l I ....
pUSH 0_10_
J R J ,_ t,J F_ 4_ !
°°,°,°°...°°°_o°°°..,,°°°°°°°.°o..,.-,,°ooo---
El Press SOUND EQ joystick to turn on the
equalizer.
The SOUND EQ lamp lights more brightly, and "FLAT" is
cleared.
[] Dial SOUND EQ to display "MANUAL." -.-
When
it is turned clockwise, the settings are selected in the fol-
lowing sequence.
(_) HEAVY t
(_) CLEAR
@ SOFT
@ DISCO
@ LIVE
(_) HALL
(_) MANUAL
_) AI EQ
_] Operate SOUND EQ joystick and set the
sound quality as desired.
(_ <-- --> direction:For selectingthe rangeof the soundto be
adjusted
Characteristics of each sound range
Under 100 Hz: Superwooferrange
Around330 Hz: Bassto midrange
Around1 kHz: Midrange
Around3.3 kHz: Midrangeto treble
Above10 kHz: Treble
(_) J, 1' direction:Foradjusting the level(7 steps)
When the level is in the center, the dot flashes rapidly.
Repeatsteps(_ and (_)to set the desiredsoundquality.
The originaldisplayis restoredon the displaypanel in about
5 seconds.When the manual equalizer is ON, all four AI EQ
lampslight.
The soundqualitycan be re-selectedusingSOUND EQ while
the lamp islighted.
To release the equalizer
PressSOUND EQ joysticksothat "FLAT" is displayed.
• The sound quality setting is stored automatically. It is recalled
when "MANUAL" is next selected.
eAII recordings are performed at the flat setting even if an alterna-
tive sound quality setting has been selected.
==
=o