Panasonic SC-AK25 Operating Instructions Manual page 20

I
ul
-I=
q)
==
0
q)
0€
Leader tape
(no recording can be made)
• DECKIQ
"1" F'I F'I t" :+l
1
....... •.'-]_'--._................ I
DECK 2
"r t'-+J_ F _ :'1
L....... '.."_-'.."-_r.---____c_-'_=_H ..... __
I ypes of tapes which can be recorded I
correctly
I
The unit automatically identifies the type of tape.
NORMAL POSITION/TYPE I O
HIGH POSITION/TYPE It ©
METAL POSITION/TYPE IV x
This system cannot make a recording or erasing correctly, if metal
position tapes are used.
I To record from the beginning of the tape []
I
You cannot record on the leader part of the tape. Before recording,
wind the tape past the leader to a point where recording can start
immediately.
How volume, sound quality/field and super I
woofer affect recording
L
The tape you are recording is not affected whatsoever by changes
in volume, sound quality/field or super woofer.
eln recording, sound quality/field are set automatically to "FLAT".
eYou can change volume and super woofer effect for the playback
sound.
I o erase a recorded sound r_
_1 Press TAPE.
_'_ Insert the recorded tape into deck 2.
[_1 Press REV MODE to select reverse mode.
[] Press • REC/STC)P.
]
oYou cannot open deck 1 while recording.
eYou cannot fast-forward or rewind one deck while recording with
the other.
NIl]