Maintenance And Cleaning Safety; Lighting Safety; Steam Program Safety - Beko B3T68230 User Manual

• Do not use materials such as household cleaning agents, soaps,
detergents, gas, gasoline, alcohol, wax, etc. to clean the product.
• The fibre filter shall be regularly cleaned. After each drying cycle, clean
the fibre filter and the inner surface of the loading door.
• Clean the fibre accumulation on the fins of the evaporator behind the
filter drawer with a vacuum cleaner. You can clean by hand, provided
you wear protective gloves. Do not try to clean with bare hands.
Evaporator fins may damage your hands. (For products with heat pump)
• Due to fire and explosion hazard, do not use solutions, cleaning
materials, steel wool or similar materials and tools to clean sensors.
• Clean the flue. (for models with flue)
• Do not drink the condensed water.

1.8 Lighting safety

• Contact an authorized service when you need to replace the LED/bulb
using for lighting (for products with lighting).

1.9 Steam program safety

• Applicable to products with steam program.
• Steam programs only use distilled water or condensed water in the
water vessel of the machine. Do not use mains water or additives. When
using condensed water in the water vessel, it should be filtered and
cleared of fibres.
• Before putting laundry in a steam program, stains on it should be
removed.
• You may put laundry that is not dirty or stained but permeated with
unpleasant odour in deodorizing program.
• Do not use any dry cleaning set or additional material within a steam
program or any program.
• Do not open the door when steam programs are on. Hot water may be
expelled.
• Do not drink the pure water supplied with the product.
Dryer / User manual 11