Table of Contents
Advertisement
Setting Optimum Resolution
An information message about setting optimum resolution will appear if you power on the product for
the first time after purchase.
Select a language on information message and change the resolution on your PC to the optimum setting.
― If the optimum resolution is not selected, the message will appear up to three times for a specified time even
when the product is turned off and on again.
― If you want to set the optimum resolution for your computer, please refer to (Q&A) →
resolution?"
― You can adjust the refresh rate according to the screen resolution by selecting
OSD menu.
― To enable the maximum refresh rate, set
Adaptive-Sync
S27AG52*, S32AG52* model only.) /
FreeSync Premium Pro
HDMI
mode only.) to
On
or set
Refresh Rate
― This menu is only available when
Refresh Rate
model only.) (in
DisplayPort
mode)
― This menu is only available when
Refresh Rate
mode)
"How can I change the
Game
→
Refresh Rate
/
FreeSync Premium
(S27AG50*, S32AG50*,
(S28AG70* model only / S49AG95*N model in
to
144
Hz.
is set to 165 Hz.(S27AG50*, S32AG50*, S27AG52*, S32AG52*
is set to 240 Hz.(S49AG95*N model only.) (in
List of graphic cards supporting HDR10 / HDR
400 / QUANTOM HDR 2000
HDR10 / HDR 400 / QUANTOM HDR 2000 is accessible only on Windows 10 systems equipped with
graphic cards that support Play Ready 3.0 Digital Rights Management (for protected HDR content). Use
graphic cards listed below for HDR10 / HDR 400 / QUANTOM HDR 2000.
•
NVIDIA GeForce 1000 series or higher
•
AMD Radeon™ RX 400 series or higher
in the
•
Intel UHD Graphics 600 series or higher
― Graphic cards that support hardware-accelerated 10-bit video decoding for HDR video codecs are
recommended.
― HDR 10 : S27AG50*, S32AG50* model only.
VESA HDR 400 : S27AG52*, S32AG52*, S28AG70* model only.
QUANTOM HDR 2000 : S49AG95*N model only.
DisplayPort
26
Advertisement
Table of Contents
