TCS3530 EVM Table of contents Table of contents Out of the box ..............3 Software installation ............4 Connect hardware ............6 Start the application ............6 Uninstall application ............7 Revision information ............8 Legal information ............9 Eval Kit Quick Start Guide • PUBLIC • Document Feedback QG001020 •...
TCS3530 EVM Out of the box Out of the box For a detailed description of the TCS3530 EVM Color ALS and Flicker Detection Sensor Module Evaluation Kit, please refer to User Guide: • UG001030 Each TCS3530 Evaluation Kit comes with the following components: Figure 1: Evaluation kit contents Item Description...
Software installation Software installation Plug the ams OSRAM flash drive into an unused USB port. Double-click the Setup.exe file on the flash drive, or click Start > Run and type E:setup.exe and press Enter. IMPORTANT: Use the appropriate drive letter in the above command to install the software.
LED still does not light, check the PC for USB error messages. Start the application To start the application select ams-OSRAM > TCS3530 EVM > TCS3530 EVM on the All Programs menu. The default installation directory, depending on the device and the operating...
TCS3530 window will open on the PC and automatically connect to the hardware. Uninstall application To remove the software from your computer (Figure 9), select ams-OSRAM > TCS3530 EVM > Uninstall TCS3530 EVM or use the Windows Control Panel.
Draft / Preliminary: The draft / preliminary status of a document indicates that the content is still under internal review and subject to change without notice. ams-OSRAM AG does not give any warranties as to the accuracy or completeness of information included in a draft / preliminary version of a document and shall have no liability for the consequences of use of such information.
Need help?
Do you have a question about the OSRAM TCS3530 EVM and is the answer not in the manual?
Questions and answers