Focus on R&D Stable and reliable
4.6 Monitoring channel selection and setting
◆ Use the [Channel Selection] key to select the monitoring channel. When the monitoring channel
is highlighted, use the [G +] or [G-] to adjust the currently monitoring channel (the selected channel
will be with headset icon). At this time, insert the headset in the monitoring headset sock of the front
panel (only 3.5mm audio plug supported) to monitor the input audio of the selected channel in real
time.
◆ When selecting the listening channel, use the [OUT +] or [OUT-] to adjust the volume of the channel
in real time. Note that the volume adjusted at this time only affects the monitoring volume, but will not
affect the actual input volume.
5 Basic operation
5.1 2W interface definition
◆ 2W audio interface. The 2W interface is 3-pin XLR male/female socket, with the consistent
definition, easy for expansion.
GND
①
Signal
③
5.2 4W interface definition
◆ There are four sets of 4W interfaces, namely 4W-1,4W-2,4W-3 and 4W-4. All 4W interfaces with
same definition.
1
2
GND
Tally_PGM Audio OUT + Audio IN +
VCC
②
2W-M
1
4W
3
4
7
2W-F
8
5
6
Audio IN -
Audio OUT - Tally_PVW
GND
①
Signal
③
7
8
GND