Table of Contents
Advertisement
[5] Speaker
VTR mode
Sound through the speaker ")
During recording
Sound in the E-E mode?)
Warning beep °)
During playback
Played-back sound
Other modes
Sound in E-E mode ?)
Warning beep °)
1) When you connect an earphone to EARPHONE jack [28], the sound through the
speaker is automatically cut.
2) E-E (Electric-to-Electric) mode
The sound of an input audio signal which passed through the amplifier in the VTR
without passing magnetic converting circuits such as a head or tape is heard
through the speaker. This E-E mode permits the input signal to be checked.
When the safety tab on the cassette is slid out to prevent accidental erasure, or the
POWER switch on the video camera is set to OFF, no sound will come from the
speaker.
3) See "Warning System", page 30.
[6] WARNING lamp
Lights up or blinks when something wrong or undesirable has happened with your
VTR. For details, see "Warning System", page 30.
MONITOR control
Adjusts the audio playback level of the sound through the speaker [5] or
EARPHONE jack [28]. When turning it fully counterclockwise, the monitor sound
cannot be heard.
POWER switch
Power.
- et
gs
Turns the power on and off. When the power is turned on, time code or tape
Dee hee
a i e gts ee
ees
running time is displayed on the display window [1].
11
Advertisement
Table of Contents
