Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Genesis Pulse EX600
Summary of Contents for Genesis Pulse EX600
- Page 1 Pulse EX600 Installation Guide Wi-Fi EasyMesh supported...
- Page 2 Genexis EasyWiFi app 1. Place the device horizontally on a Installation and management of the flat surface. Pulse EX600 can be done with help of the mobile application Genexis Wall-mount EasyWiFi for the applicable installation 1. Download and print the drilling...
- Page 3 4. Wait until the Status LED stops blinking and turns solid green. Your Pulse EX600 is now setup as a router. Your network is now ready to be extended with a wireless or...
- Page 4 Wireless extender Your Pulse EX600 is now setup as a Switching the WiFi ON/OFF Manual pairing 1. Place the additional Pulse EX600 as wireless extender. The WiFi function of the Pulse EX600 You can also connect your personal described on the previous page.
- Page 5 LED & button overview Using the web interface When connected to your network, you can access the Pulse EX600 web interface to change your device settings. 1. Use a browser on your personal device and navigate to 'GUI' as printed on the label of the Pulse EX600.
-
Page 6: Port Overview
Port overview WAN port Power port Reset ON/OFF USB 2.0 LAN ports button switch port Reset button (recessed) ON/OFF switch Reboot – press and release once Switch ON – flip the switch to ON Factory reset – press and hold until the Switch OFF –... - Page 7 Is the Status LED solid yellow? a connection with the broadband the Pulse EX600 to its factory default The WiFi of the Pulse EX600 is turned network. Please verify your wired settings. You can press this button with OFF. Please turn the WiFi ON as connection with the broadband a small pin or paperclip.
-
Page 8: Eu Declaration Of Conformity
The Netherlands Frequency bands and maximum radio frequency power transmitted The Pulse EX600 operates in the frequency bands of 2,4 Ghz and 5Ghz. The maximum radio frequency power transmitted in these bands is: • 20 dBm (100 mW) (EIRP) for the 2400 MHz – 2483.5 MHz band •... - Page 9 Revision 2.0 - October 2023 - Copyright © 2023 Genexis Netherlands B.V. All rights reserved. Multiple languages of this document and additional product information are available on https://genexis.eu/product/pulse/downloads Genexis assumes no responsibility for any inaccuracies in this document. Genexis reserves the right to change, modify, transfer, or otherwise revise this publication without notice.
Need help?
Do you have a question about the Pulse EX600 and is the answer not in the manual?
Questions and answers