Page 2
Genexis EasyWiFi app Installation and management of the Genexis FiberTwist device can be done with help of the mobile application Genexis EasyWiFi. Please follow the steps on the left page. Download app and...
Page 3
Twist! 1. Press and hold the unlock button (on the right side of the Blind Cover or active device). 1. Take the FiberTwist out of the box. 1. Place the FiberTwist on the FTU/Bracket as 2. Rotate the Blind Cover or active device counterclockwise till it blocks.
Page 4
Manual pairing 1. Use a web browser on your personal device product is powered on. the FiberTwist in the ON position to turn on The WiFi network name and WiFi key and navigate to the GUI URL as printed on the device.
LED overview Uplink Green – optical WAN link is established Green (blinking) – optical WAN link is in progress Red (blinking) – insufficient optical input signal Off – no optical WAN link detected Internet (IP connectivity) Green – connected (DNS available) Green (blinking) –...
Button overview Unlock button Remove FiberTwist – press and hold while twisting counterclockwise Mode button Pairing (WPS) – press and release once WiFi ON – press and hold until WiFi LED turns solid green WiFi OFF – press and hold until WiFi LED turns off...
Port overview ON/OFF switch Telephone Reset Power LAN ports TV port ports button port Unlock button LED dim button Dim LEDs – press and release repeatedly to dim LEDs USB 2.0 port Reset button (recessed) ON/OFF switch Reboot – short press once Switch ON –...
EU Declaration of Conformity Is the Status LED solid red? Is the Internet LED blinking green for Hereby, Genexis Netherlands B.V. declares that the radio equipment type FiberTwist is in compliance Contact your service provider. 5 minutes? with Directive 2014/53/EU, Directive 2009/125/EC, Directive 2011/65/EU and Delegated Directive FiberTwist does not have a connection with 2015/863.
Need help?
Do you have a question about the FiberTwist and is the answer not in the manual?
Questions and answers