Advertisement
Please read the following user's manual carefully before the first use of the products and keep it for future
reference. Scuba diving is treated as an extreme sport and requires proper training and certification. Using scuba
equipment by an untrained and inexperienced person without proper certification may cause health damage and
even risk of death. Light-for-me backup lights are designed to be used underwater only.
Set content
The 2XML Hand Torch set consists of:
- 2x Backup XML Mini
- Goodman handle
- Codura cover
Important!
Batteries and charger not included
Power source
Light-for-me Backup XML MINI is powered by 1 x 18650
Li-Ion rechargeable battery. It is recommended to use
battery of high quality and from a reliable source.
Before inserting the battery into the backup's body, check
its condition - do not use damaged or broken batteries.
The battery should be put into the backup's body with
the sign – (minus) to the head and with the sign +
(plus) to the inner part of the body (see the photo).
Placing the battery the other way may cause a complete
and irreversible damage to the light diode. Do not force
the battery into the body, it should go in / out easily.
Charge the battery according to the specification given by
its manufacturer with an appropriate and approved
charger. 18650 Li-Ion batteries require a dedicated
charger.
Switching on/off
Light-for-me Backup XML Mini is switched on/off by twisting the head to the
body. To switch the light on, hold the body with one hand and twist the head in a
clockwise direction with the other. To switch the light off, hold the body with one
hand and twist the head in an anticlockwise direction with the other.
When switching the backup off under water, stop twisting the moment the light
goes off. If you continue to twist the head, you may flood the backup.
Do not switch the light on when not in water for more than 5 seconds. It is
allowed to switch the light on to test if it works properly, but for maximum of 5
seconds. Longer use of the light on the surface may cause the LED to get too
warm and get damaged as a result. Do not direct the light into your or anyone
else's eyes.
LIGHT FOR ME
2XML Hand Torch user's manual
2XML Hand Torch
1/3
Advertisement
Table of Contents
Related Manuals for Light-For-Me 2XML
Summary of Contents for Light-For-Me 2XML
- Page 1 Scuba diving is treated as an extreme sport and requires proper training and certification. Using scuba equipment by an untrained and inexperienced person without proper certification may cause health damage and even risk of death. Light-for-me backup lights are designed to be used underwater only. Set content...
- Page 2 Store the backup with its battery taken out. Keep those surfaces clean for better electrical conductivity Check sealing orings regulary and replace them if needed Tech Specifications 2XML HAND TORCH Purpose main light Material anodised aluminium Max operating depth 100m...
- Page 3 Check the battery’s head. manufacturer advice for flooding the battery. For safety reason do not use the battery again. Contact the light-for-me manufacturer. Check the battery - charge it if necessary; damaged or suspiciously looking The light flashes from time to battery should be replaced with a new one.
Need help?
Do you have a question about the 2XML and is the answer not in the manual?
Questions and answers