Honda Ridgeline 2020 Manual page 506

Rear Turn Signal and Back-Up Light Bulbs
When replacing, use the following bulbs.
Back-Up Light: 21 W
Rear Turn Signal Light: 21 W
Screws
Bulb
Socket
Bulb
Socket
Brake/Taillight and Rear Side Marker Lights
Brake/taillight and rear side marker lights are LED type. Have an authorized Honda
dealer inspect and replace the light assembly.
1. Use a phillips-head screwdriver to remove
the screws.
2. Pull the light assembly out of the rear pillar.
3. Turn the socket counter-clockwise and
remove it. Remove the old bulb.
4. Insert a new bulb and turn clockwise.
5. Slide the light assembly onto the guide on
the body.
6. Align the pins with the body grommets,
then push in until they fully seat.
uuReplacing Light BulbsuRear Turn Signal and Back-Up Light Bulbs
505