Honda Ridgeline 2020 Manual page 391

uuWhen DrivinguShifting
■
Shift Operation
390
Tachometer's Red Zone
M (sequential mode) Indicator
Sequential Mode Gear Selection
Indicator
Shift Position Indicator
(Transmission System Indicator)
Press the
Pull back the
Press the
Press the
Each time you press the button,
the mode switches between Drive
and S Position mode.
Shift Button
Indicator
1Shift Operation
button.
( P
( R button.
( N button.
button.
D/S
NOTICE
When you change D ( to ( R and vice versa, depress
the brake pedal to come to a complete stop, then
select the intended shift position while maintaining
brake pressure.
Use the shift position indicator and the shift button
indicator to check the shift position before selecting a
shift button.
If the indicator of the currently selected shift position,
or all the shift position indicators are blinking
simultaneously, there is a problem with the
transmission.
Avoid sudden acceleration and have the transmission
checked by a dealer as soon as possible.
The fuel supply may be cut off if you drive at engine
speeds in or over the tachometer's red zone (engine
speed limit). If this happens, you may experience a
slight jolt.
When the engine speed is increased while the
transmission is in , or , the fuel supply may
( N P ( ( R
be cut off even without the engine speed entering
the tachometer's red zone.
The beeper sounds once when you change to
2 Customized Features P. 295
R ( .