Table of Contents
Advertisement
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable.
Figure 8. Disconnect the battery pack cable and remove the solid-state drive thermal pad
Step 2.
Remove one screw and remove the solid-state drive by pulling it away from the slot.
Figure 9. Remove one screw and the solid-state drive
Screw specifications
M2.0 × L2.2
Step 3.
Peel off the mylar from the solid-state drive.
32
Yoga 7 (14", 7) and Yoga 7i (14", 7) Hardware Maintenance Manual
Number of screws
1
Advertisement
Table of Contents
