TM
OPERATOR'S MANUAL
A Division of Snow Joe, LLC
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Always follow these safety guidelines. Failure to do so may result
in serious bodily injury or death.
General Safety
m
WARNING!
This appliance is not intended for use
by children or by unassisted, unsupervised persons whose
physical, sensory or mental capabilities prevent them from using
it safely. Children should be supervised to ensure that they do
not play with the appliance.
Before starting up your machine, please check it carefully
for any defects. If you find any, do not start up your machine.
Contact your authorized Snow Joe
call the Snow Joe
®
+ Sun Joe
1-866-SNOWJOE (1-866-766-9563).
m
WARNING!
When using the power tool, basic safety
precautions should always be followed to reduce the risk of fire,
electric shock, and personal injury. These include:
1. Keep work area clean and well-lit – Cluttered, dark areas
invite accidents. Always inspect the area where the pole +
pruning saw is to be used.
2. Avoid dangerous environments – Do not use the power
tool in rain, in damp or wet locations, or in bad weather,
especially when there is a risk of lighting. This decreases the
risk of being struck by lighting. Do not operate the power tool
in gaseous or explosive atmospheres or use the power tool
near flammable or combustible liquids. Motors in these tools
may spark, and the sparks might ignite fumes.
3. Know your product – Know how to start and stop the
machine. Be thoroughly familiar with the controls.
4. Keep children, bystanders, and pets away –
All spectators, including pets, should be kept a safe distance
away from the work area.
5. Dress properly – Do not wear loose clothing or jewelry. They
can get caught in moving parts. Protective rubber gloves and
non-slip footwear are recommended when working outdoors.
6. Avoid Slipping – Exercise caution to avoid slipping or falling.
Wear protective footwear that will protect your feet and
improve your footing on slippery surfaces.
Original instructions.
© 2023 Snow Joe, LLC. All rights reserved.
CORDLESS TELESCOPING
R
POLE + PRUNING SAW
24V* IONMAX | 2.0 Ah | 6-INCH
Model 24V-HCSWP-6-LTE
+ Sun Joe
dealer or
®
®
®
customer service center at
7. Stay alert – Watch what you are doing. Use common sense.
Do not operate the power tool when you are tired,
or under the influence of alcohol or drugs.
8. Do not overreach – Keep proper footing and balance at
all times.
9. Prevent unintentional starting – Do not pull the trigger
before connecting to battery pack, picking up or
carrying the appliance. Do not carry the pole + pruning
saw with your finger on the trigger.
10. Use the right appliance – Do not use the power tool for any
applications other than those for which it was intended.
11. The chain is sharp – Don't grasp the exposed chain or
cutting edges when picking up or holding the power tool.
12. Use two hands – Hold the telescoping pole and handle with
both hands to avoid loss of control.
13. Remove the battery – Remove the battery from the power
tool when it is not in use, before servicing it, when changing
accessories, and when performing any other maintenance
task.
14. Use safety glasses – Also use safety footwear, snug-fitting
clothing, protective gloves, hearing and head protection.
15. Use head protection – Always use head protection when
operating the power tool overhead. Falling debris can result
in serious personal injury.
16. Do not force the tool – It will perform better with less
likelihood of personal or mechanical injury if it is used at the
rate for which it was designed.
17. Check for damaged parts – Before further use of the
appliance, all guards and parts should be carefully checked
to determine that it will operate properly and perform its
intended function. Check for alignment of moving parts,
binding of moving parts, breakage of parts, mounting, and
any other condition that may affect its operation. A guard
or other part that is damaged should be properly repaired
or replaced. Contact the Snow Joe
service center at 1-866-SNOWJOE (1-866-766-9563) for
assistance.
18. Maintain the power tool with care – Keep the cutting edges
sharp and clean for optimal performance and to reduce the
risk of injury. Keep the handles dry, clean, and free from
oil and grease. Follow the additional recommendations
described in the maintenance section
of this manual.
*DISCLAIMER: Initial no-load voltage, when fully charged,
peaks at 24V; nominal voltage under typical load is 21.6V.
1
Form No. SJ-24V-HCSWP-6-LTE-880E-M
+ Sun Joe
customer
®
®
SAVE THESE INSTRUCTIONS