ASTRO A50 Manual page 13

5. Next, scroll down and select "Sound Settings". Under Sound settings, select "Audio
Output Settings" and select "Optical Digital". Make sure "Dolby Digital 5.1 Ch" is
selected.
6. Turn your A50s on and ensure they are paired to the TxD and game and voice balance
on the left ear is at 50/50. You are now ready to use your A50s.
A50 Gen 2 setup on PS4
●
How to setup your A50 on PS4
For the video setup guide, kindly copy and paste the following link:
You will need:
A50 Headset
●
A50 TxD
●
TxD USB Power Cable, Optical Cable, A50 Charge Cable
●
1. First, ensure the A50 Headset and TxD have the most recent firmware installed.
Connect the A50 Headset to the TxD USB Port in order to update it on your PC.
2. Connect the TxD to your PS4. Insert the TxD USB Power cable to the front USB Port and
connect the Optical cable to the TxD and PS4 optical connection located on the rear.
3. Next, turn on your PS4 and wait for it to load to the home screen.
4. Go into the Settings tab on your top bar of your PS4 home screen. Go to → Settings →
Sound and Screen→ Audio Output Settings→ Primary Output Port→ Digital
Out(optical)→ then check Dolby Digital 5.1 ch then hit OK.
5. Under the Audio Output Settings menu select Output to Headphones and make sure
Chat Audio is selected and not All Audio.
Also under the Audio Output Settings menu select Audio Format (priority) and make
sure Bitstream (Dolby) is selected and not Linear PCM.
6. Turn your A50s on and ensure they are paired to the TxD and game and voice balance
on the left ear is at 50/50. You are now ready to use your A50s.
A50 Wireless Headset PS FAQs
youtu.be/vWQ1wxIVqSU
13