Sony DVP-NS325 Operating Instructions Manual page 58

• DOWNMIX (DVD only)
Switches the method _r mixing down to 2
channels when you play a DVD which has
rear sound elements (channels) or is recorded
in Dolby Digital format. For details on the
rear signal components, see "Checking the
audio signal format" (page 40). This function
affects the output of the following jacks:
-LINE OUT L/R (AUDIO)jacks
-DIGITAL OUT (COAXIAL)jack when
"DOLBY DIGITAL" is set to "D-PCM"
(page 58).
DOLBY
SUR-
ROUND
Normally, select this position.
Multi-channel audio signals are
output to two channels for
enjoying surround sounds.
NORMAL Multi-channel audio signals are
downmixed to two channels for
use with your stereo.
• DIGITAL OUT
Selects if audio signals are oulput via the
DIGITAL OUT (COAXIAL)jack.
ON Normally select this position. When
ou select "ON," see "Setting the
digital output signal" for further
settings.
OFF The influence of the digital circuit
upon the analog circuit is minimal.
Setting the digital output signal
Switches the method of outputting audio
signals when you connect a component such
as an amplifier (receiver) or MD deck with a
digital input jack.
For connection details, see page 17.
Select "DOLBY DIGITAL" and "DTS" after
setting "DIGITAL OUT" to "ON."
If you connect a component that does not
conform to the selecled audio signal, a loud
noise (or no sound) will come out from the
speakers, affecting your ears or causing the
speakers to be damaged.
• DOLBYDIGITAL(DVD only)
Selects the type of Dolby Digital signal
D-PCM
Select this when the player is
connected to an audio
component without a built-in
Dolby Digital decoder. You can
select whether the signals
conform to Dolby Surround
(Pro Logic) or not by making
adjustments to the
"DOWNMIX" item in
"AUDIO SETUP" (page 58).
DOLBY Select this when the player is
DIGITAL connected to an audio
component with a built-in
Dolby Digital decoder.
• DTS (DVD only)
;elects whether or not to output DTS signals.
OFF
Select this when the player is
connected to an audio
component without a built-in
DTS decoder.
ON Select this when the player is
connected to an audio
component with a built-in DTS
decoder.
58