Step6: Quicksetup - Sony DVP-NS325 Operating Instructions Manual

Step 5: Connecting the Power Cord
Plug the player and TV power cords into an AC outlet.
22
Step6: QuickSetup
Follow the steps below to make the minimum number of basic adjustments for using the player.
To skip an adjustment, press I_H. To return to the previous adjustment, press 141_1.
)
)
1
Turn on the TV.
2 Press'/O.
-- I/rb
--ENTER
LANGUAGE SETUP
5 PressI,/4, to select a language.
The player uses the language selected
here to display the menu and subtitles as
well.
6
PressENTER.
The Setup Display for selecting the
aspect ratio of the TV to be connected
appears.
0 Switch the input selectoron your
TV so that the signal from the
player appears on the TV screen.
"Press [ENTER/to run QUICK SETUP"
appears at the bottom of the screen. If this
message does not appear, select
"QUICK" under "SETUP" in the Control
Bar to run Quick Setup (page 54).
4
Press ENTERwithout insertinga
disc.
The Setup Display for selecting the
language used in the on-screen display
appears.
7
8
Press4,/4, toselectthe settingthat
matchesyour TV type.
• It you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
(page 55)
• If you have a wide-screen IV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 55)
PressENTER.
The Setup Display for selecting the type
of jack used to connect your amplifier
(receiver) appears.